Main - sun1 - sun2 - sun3/3x - sun4 - sun4c - sun4d - sun4m - sun4u - Cobalt - Sbus - PCI - Mbus - Ultra - input - output - storage - misc

Pictures

of Sun Hardware, Parts and Accessories (and more)

Compiled by Craig Dewick

sun4u Series (4th Generation Sparc, UPAbus + Sbus/PCI) Machines and Parts

1. - Ultra 1/140 (A11) Sbus-based workstation system unit,
   
2. - Ultra 1/170 (A11) Sbus-based workstation base unit,
   
   • - side view,
     
   • - rear view,
     
   • - 180 watt power supply (Sun # 300-1248/1308, type A101) manufactured by Sony in Japan. You also see mains end and fan-side views,
     
   • - SCSI breakout cable connecting the motherboard to the SCSI hard drive and CD-ROM drive bays,
     
3. - Ultra 1/170 (A13) PCI-based workstation base unit (never released by Sun!), pictured on top of an Ultra 2 base unit,
   
   • - rear view showing the PCI slot openings, with the Ultra 2 for comparison,
     
   • - internal view from the top showing the PCI riser board on the right hand side,
     
   • - another internal view looking directly at the PCI riser board,
     
   • - Sun identity label clearly showing the A13 model code.
     
4. - Ultra 2 (A14) Sbus-based workstation base unit. You can also see a rear view,
   
   • - 350 watt power supply (Sun # 300-1315/1342, type A102) manufactured by Zytec in Austria,
     
5. - PCI-based Ultra 2 clone system (A15?) based around Sun's OEM Ultra-2 SparcEngine system board. Sun never released a PCI-based Ultra-2 variant, but this is what it would have been like:
   
   • - rear view showing the PCI slot openings (four of them) clearly. Note the PS/2-style mouse/keyboard interface in addition to the standard Sun 8-pin miniDIN keyboard/mouse port,
     
   • - internal view showing the two PCI riser boards plugged into the system board, along with the CPU modules and hinged metal cover over the RAM slots (top-right),
     
   • - close-up internal view showing where the two PCI riser boards plug into the system board.
     
6. - Ultra 30 (A16) PCI-based workstation system. This was officially Sun's first PCI-based machine (even though there were the prototype PCI-based Ultra 1 system and PCI-based Ultra 2 clones around at the time),
   
   • - motherboard (Sun # 501-3139) from the component side. You can also see it viewed from the other side,
     
   • - rear view of the tower case,
     
   • - 350 watt power supply (Sun # 300-1343, type A125) manufactured by Zytec in Austria. You can also see a top view,
     
7. - Ultra 60 (A23) PCI-based workstation base unit,
   
   • - motherboard (Sun # 501-5606) from the component side,
     
   • - 350 watt power supply (Sun # 300-1343, type A125) manufactured by Zytec in Austria. You can also see a top view,
     
8. - SCA drive bay assembly (Sun # 540-3016 for Sun Ultra 30/60 systems (picture shows SCA backplane and associated cables also),
   
9. - Ultra 60 clone system manufactured by Cytec (in Dallas, Texas, USA):
   
   • - front view with mass-storage door opened,
     
   • - rear view of the system,
     
   • - close-up of the ID label that's affixed to the rear of the enclosure,
     
   • - top views of the system looking towards the front (mass-storage bay on left-hand side of the picture) and looking towards the rear (Sun Ultra 60 power supply on right-hand side of the picture).
     
10. - Two-piece hard disk mounting frame for Ultra 1's and 2's. Right side rail is Sun # 330-1951, left-side hinged rail (with faceplate) is Sun # 330-1952,
    
11. - A pair of 32 MB SIMM's (Sun # 501-2622, x7002a) for Ultra 1's, 2's, 30's, 60's, and E250's (they also fit sun4m Sparc 10's and 20's),
    
12. - A pair of 64 MB SIMM's (Sun # 501-2480, x7003a) for Ultra 1's, 2's, 30's, 60's, E250's and E450's (they also fit sun4m Sparc 10's and 20's),
    
13. - A pair of 128 MB SIMM's (Sun # 501-3136, x7004a) for Ultra 1's, 2's, 30's, 60's, 80's, E250's and E450's,
    
14. - 256 MB SIMM (Sun # 501-6056, sold in pairs as x7005a) for Ultra 80's, E220R's, E420R's, E450's, Netra t1400's and t1405's. You can also see the other side of the module,
    
15. - Creator 2D series 1 (x3651a, x3653a and x3669a) (aka FFB) horizontal format UPA-bus 24-bit framebuffer card (Sun # 501-4127) for Ultra 1E's, 2's and Ex000's. You can also see a bottom view,
    
16. - Creator3D series 3 (x3663a and x3670a) (aka FFB2+) vertical format UPA-bus 24-bit framebuffer card (Sun # 501-4788/5690) for Ultra 10's, 30's and 60's,
    
17. - Creator series 3 (x3662a and x3672) (aka FFB2+) vertical format UPA-bus 24-bit framebuffer card (Sun # 501-4789) for Ultra 10's, 30's and 60's,
    
18. - Creator3D series 3 (x3661a and x3671a) (aka FFB2+) horizontal format UPA-bus 24-bit framebuffer card (Sun # 501-4790) for Ultra 1E's, 2's and Ex000's,
    
19. - Elite3D m3 (x3664a and x3665a) (aka AFB) UPA-bus 24-bit framebuffer card (Sun # 501-4860) for Ultra 10's, 30's and 60's, etc.,
    
20. - Ebus audio module for Ultra 30's, 60's, and 80's,
    
21. - Ultra 5 (A21) PCI-based workstation system unit:
    
    • - Ultra 5/10 motherboard (Sun # 375-0009) that supports 300 and 333 MHz processors (requires 60 ns RAM modules),
      
    • - Ultra 5/10 motherboard (Sun # 375-0115) that supports 360 and 440 MHz processors (requires 50 ns RAM modules),
      
    • - an internal view,
      
    • - a rear view,
      
22. - Ultra 10 (A22) PCI-based workstation system unit front/rear views. You can also see a front-only view:
    
    • - Ultra 5/10 motherboard (Sun # 375-0009) that supports 300 and 333 MHz processors (requires 60 ns RAM modules),
      
    • - Ultra 5/10 motherboard (Sun # 375-0115) that supports 360 and 440 MHz processors (requires 50 ns RAM modules),
      
    • - different angle views and an internal view in one image,
      
    • - 243 watt power supply (Sun # 370-3171) made by Mitac. You can also see a label close-up view,
      
    • - 370-3799 (x7039a) 512 MB (2 x # 370-3799 256 MB) RAM kit,
      
23. - 370-3694 (x6171a) 32x EIDE CD-ROM drive made by Goldstar (now LG) (A21 and A22 only),
    
24. - 370-3799 equivalent 256 MB 3rd-party low-profile RAM modules (A21 and A22). Note these modules were marked as 60 ns, not 50 ns which is the spec for genuine # 370-3799's,
    
25. - Netra t100 (A16/N01) telco server unit front view,
    
    • - ??? watt power supply (Sun # 300-1447) made by ???. You can also see a hot end view,
      
    • - 360 MHz SPARCengine CP-1500 motherboard (Sun # 501-5472) fitted with a mezzanine RAM card,
      
    • - brushless DC fan,
      
26. - Netra t105 (N06) telco server unit front view,
    
    • - rear view of the system,
      
    • - internal view of the system,
      
    • - 360 MHz SPARCengine CP-1500 motherboard (Sun # 501-5472) fitted with a mezzanine RAM card,
      
27. - pair of rack-mount brackets (Sun # 340-5819) for Netra t100/t105 servers,
    
28. - Netra t1 AC200 (N21) telco server unit front view,
    
29. - D25 to RJ45 serial port adaptor (Sun # 530-2889) to suit the serial ports on s-unit Netra t1 series servers,
    
30. - Netra ct400 (N?) telco server unit front view:
    
    • - 360 MHz SPARCengine CP-1500 motherboard (Sun # 501-5472) fitted with a mezzanine RAM card,
      
    • - a different view from the top/front corner,
      
    • - close-up view of the mezzanine RAM board,
      
    • - view of the underside.
      
31. - Netra t1125 (A24/N03) telco server unit front view,
    
    • - rear view of the system,
      
    • - internal view of the system,
      
    • - motherboard (Sun # 501-5606) from the component side,
      
32. - Enterprise 220R (A34) server unit,
    
    • - another front view of the E220R,
      
    • - rear view of the system,
      
    • - internal view of the system,
      
    • - motherboard (Sun # 501-5606) from the component side,
      
    • - 380 watt power supply (Sun # 300-1449, type A148) manufactured by Lucent. You can also see rear and top views,
      
33. - Enterprise 250 (A26) server unit,
    
    • - motherboard (Sun # 501-4681) for an E250 with the SCSI cabling loom attached,
      
    • - castor base assembly. You can also see an underside view,
      
34. - Enterprise 420R (A33) server unit,
    
    • - 380 watt power supply (Sun # 300-1449, type A148) manufactured by Lucent. You can also see rear and top views,
      
35. - Enterprise 450 (A25) server unit:
    
    • - 300-1322 DC-DC converter required for each CPU module in Ultra 450/E450 (aka A20/25) systems,
      
    • - 512 MB RAM kit made by Kingston (part # KTS7001/512),
      
36. - Enterprise 3000 server unit. You can also see a view with the front cover open, and a rear view,
    
37. - Enterprise 3500 server unit,
    
    • - 184 watt peripheral power supply (Sun # 300-1307, type A109) with AC input made by FDK. You can also see a different view,
      
    • - 195 watt power supply (Sun # 300-1358, type A129) made by FDK. You can also see hot end and rear end views,
      
    • - auxilliary fan assembly (Sun # 540-2757). You can also see a different view,
      
38. - Enterprise 4500 server unit,
    
    • - AC input and fan assembly (Sun # 370-1811). You can also see a different view,
      
39. - Enterprise 5000 server unit,
    
    • - AC input and fan assembly (Sun # 370-1812). You can also see different views here and here,
      
40. - Enterprise 6500 server unit,
    
    • - front view with the front cover open,
      
    • - rear view,
      
41. - 300 watt power supply + cooling module (Sun # 300-1260, type A106) made by FDK for Ultra Ex000 and Ex500 servers,
    
42. - 300 watt power supply + cooling module (Sun # 300-1444, type A146) made by FDK for Ultra Ex000 and Ex500 servers. You can also see a different view,
    
43. - Keyswitch assembly (Sun # 370-1810) for Ultra Ex000 servers. You can see different views here and here,
    
44. - I/O + Sbus board (Sun # 501-4287) (x2610a) for Ultra Ex000 servers,
    
45. - CPU/memory board (Sun # 501-4312) (x2601a) for Ultra Ex000 servers,
    
46. - CPU/memory board (Sun # 501-4882) (x2602a) for Ultra Ex500 servers. Notice the pair of 501-5762 (x2580a) 400 Mhz Ultrasparc-II processors!
    
47. - type-4 I/O board with SOC+ (Sun # 501-4883) (x2612a) for Ultra Exx00 servers. You can also see a top view,
    
48. - Enterprise 10000 server unit,
    
    • - front view with the front cover open,
      
    • - rear view,
      
49. - SunFire system board (Sun # 501-4362). You can also see a direct top view,
    
50. - One-piece low-profile hard disk mounting frame (Sun # 540-3024) for Ultra 1's, 2's, 30's, 60's, 80's, E250's, E450's, E3k's and others,
    
51. - One-piece high-profile hard disk mounting frame (Sun # 540-3025) for Ultra 1's, 2's, 30's, 60's, 80's, E250's, E450's, E3k's and others,
    
52. - One-piece high-profile hard disk mounting frame (Sun # 540-3328) for all Ex000 machines,
    
53. - SunBlade 100 (A36) workstation:
    

This page has been accessed times.

Back to the Sun Shack Picture Index

Main - sun1 - sun2 - sun3/3x - sun4 - sun4c - sun4d - sun4m - sun4u - Cobalt - Sbus - PCI - Mbus - Ultra - input - output - storage - misc