Sun Fire[tm] B1600 Blade System Chassis: Repair Procedures
This section provides the most common repair procedures for the
Sun Fire B1600, which are included in the following manual:
 Sun
Fire B1600 System Chassis Administration Guide (816-4765)
The following table provides the section for each
procedure.
| Component |
Remove
|
Install
|
Tips |
| Blade |
12.1.2
|
12.1.3
|
- Fan failures may occur on Sun Fire B100s and Sun Fire B100x Server
blades where fan speed falls below the critical threshold (FIN I1079-1).
- Sun Fire B100s Server FRU's may boot from network instead of local
disk after installation due to two incorrectly set OBP (FIN I0951-1).
- Fan issues may occur on SunFire B1600 (B100s and B100x
Server blades) where the fan speed falls below critical
threshold values (FCO A0236-1).
- B1600 systems configured with one or more Sun Fire
B10n Content Loadbalancing blades may experience a
hardware issue resulting in a "watchdog timeout" event.
(FCO A0230-1).
|
| Chassis Replacement |
12.4
|
12.4
|
|
| Power Supply Unit (PSU) |
12.3.2
|
12.3.3
|
|
| Switch and System Controller (SSC) |
12.2.2
|
12.2.3
|
- Specific Sun Fire B1600 Blades may experience intermittent operation
issues with the Switch and System Controller.(FCO A0232-1).
|
| 
