Sun Blade[tm] 2500 Workstation: Repair Procedures
This section provides the most common repair procedures for the
Sun Blade 2500 workstation, which are included in the following manual:
 Sun Blade 2500
Service, Diagnostics, and Troubleshooting Manual (816-0996)
The following table provides the page numbers for each procedure.
Note: A Sun Blade 2500 Hardware Documentation CD assembly,
part number 724-7413-01, is part of the accessory kit that ships inside the
carton with each Sun Blade 2500 Workstation. The documentation CD includes many
Sun Blade 2500 manuals. The files on the CD include movies for major hardware
service procedures. These movies can be viewed as standalone procedures, and
can also be reached by links within the HTML Service Manual on the Sun Blade
2500 Hardware Documentation CD.
| Component |
Remove
|
Install
|
Tips |
| Access Panel |
10-12
|
15-3
|
|
| Battery |
11-24
|
11-25
|
|
| Bezel |
10-16
|
15-2
|
|
| CPU Fan / Heat Sink |
11-14
|
11-18
|
|
| DVD-ROM Drive |
12-9
|
12-12
|
|
| DVD-ROM Drive Cables |
14-6
|
14-9
|
|
| Disk Drive |
12-3
|
12-5
|
|
| Front Fan |
13-13
|
13-15
|
|
| Front Fan Bracket |
13-38
|
13-40
|
|
| Memory DIMMs |
|
|
-
Minimum OBP version is required to support new DIMMs with
333MHz dual data rate.
(FIN I1148-1).
- Systems will fail to pass self-test if the OBP version is below the
required minimum level to support the JEDEC SPD 1.0 formatted DIMMs (FIN I1092-1).
-
Sun Enhanced Memory DIMM Replacement Policy.
(FIN I0760-2).
|
| Motherboard |
11-42
|
11-49
|
|
| NVRAM |
11-26
|
11-27
|
|
| PCI Cards |
11-30
|
11-33
|
- Special considerations for multiple graphics accelerators, page 11-36
|
| PCI Card Support and Chassis Cross Brace |
13-43
|
13-47
|
|
| Power Supply |
13-3
|
13-8
|
|
| Power Switch and LED Cable Assembly |
14-19
|
14-21
|
|
| Rear Fan |
13-19
|
13-22
|
|
| SCSI Backplane |
13-27
|
13-30
|
|
| SCSI Backplane Cables |
14-11
|
14-15
|
|
| Smart Card Reader |
12-17
|
12-18
|
|
| Smart Card Reader Cable |
14-3
|
14-5
|
|
| Speaker |
13-35
|
13-36
|
|
| System board |
11-42
|
11-49
|
|
| System Drive Rails |
13-51
|
13-52
|
|
| Graphics Card |
|
|
- XVR-600 graphics card can cause rendering performance issue when
performing simultaneous rendering update with OpenGL windows. (FIN I1161-1).
|
| 
