Sun Fire [tm]E2900 : Repair Procedures
This section provides tips (when available) for the most common
repair procedures for the Sun Fire E2900. The repair procedures are provided
in the following manual:
The following table provides the available tips
for each procedure.
| Component |
Tips |
| Memory |
- Too many Memory DIMMs are being unnecessarily replaced on the
UltraSPARC II, III, III+, IIIi and, IV families of systems,
increasing customers' service actions and related system downtime. (FIN I0760-2).
|
| CPU/Memory Board |
- The Vcore setting for UltraSPARC IV 1350MHz boards should be
1.25V, but some earlier releases of firmware will power on
and operate the board at an incorrect voltage.
(FIN I1166-1).
|
|
|
|
