System Boards - Sun Fire 12K/15K/4800/6800/E4900/E6900 (UltraSPARC IV)
CPU/Memory Uniboard
Sun Fire 12K / 15K / E20K / E25K
Sun Fire 4800 / 6800 / E4900 / E6900
| 501-6520 |
501-6550 |
0MB w/o USIV w/o Cache |
0MB 501-6520 8× 8MB Ecache w/o USIV |
|
| 540-5664 |
0MB FRU 4 × 1050MHz USIV 0MB 501-6520
November 2003 Jaguar 1050 |
| 540-5940 |
0MB FRU 4 × 1200MHz USIV 0MB 501-6520
November 2003 Jaguar 1200
(see 12K/15K/E20K/E25K Notes below) |
|
|
| 501-6863 |
501-6864 |
0MB w/o USIV w/o Cache |
0MB 501-6863 8× 8MB Ecache w/o USIV |
|
| 540-6251 |
0MB FRU 4 × 1200MHz USIV 0MB 501-6863
June 2004 Jaguar 1200
(see 12K/15K/E20K/E25K Notes below) |
|
|
| 501-6783 |
501-6826 |
0MB w/o USIV w/o Cache |
0MB 501-6783 8× 8MB Ecache w/o USIV |
|
| 540-6248 |
0MB FRU 4 × 1050MHz USIV November 2004
0MB 501-6783 Jaguar 1050 |
| 540-6233 |
0MB FRU 4 × 1200MHz USIV November 2004
0MB 501-6783 Jaguar 1200
(see 12K/15K/E20K/E25K Notes below) |
| 540-6295 |
0MB FRU 4 × 1350MHz USIV January 2005
0MB 501-6783 Jaguar 1350 |
|
|
CPU1 and CPU0 Memory
| SOCKET |
CPU |
BANK |
DIMM |
J14600 J14601 J14500 J14501
J14400 J14401 J14300 J14301 |
P1 P1 P1 P1 P1 P1 P1 P1 |
B0 B1 B0 B1 B0 B1 B0 B1 |
D3 D3 D2 D2 D1 D1 D0 D0 |
J13600 J13601 J13500 J13501
J13400 J13401 J13300 J13301 |
P0 P0 P0 P0 P0 P0 P0 P0 |
B0 B1 B0 B1 B0 B1 B0 B1 |
D3 D3 D2 D2 D1 D1 D0 D0 |
|
|
CPU3 and CPU2 Memory
| SOCKET |
CPU |
BANK |
DIMM |
J16600 J16601 J16500 J16501
J16400 J16401 J16300 J16301 |
P3 P3 P3 P3 P3 P3 P3 P3 |
B0 B1 B0 B1 B0 B1 B0 B1 |
D3 D3 D2 D2 D1 D1 D0 D0 |
J15600 J15601 J15500 J15501
J15400 J15401 J15300 J15301 |
P2 P2 P2 P2 P2 P2 P2 P2 |
B0 B1 B0 B1 B0 B1 B0 B1 |
D3 D3 D2 D2 D1 D1 D0 D0 |
|
System Codenames
| System |
Codename |
| Sun Fire 4800-6800 |
Serengeti |
| Sun Fire E4900 |
Amazon 4 |
| Sun Fire E6900 |
Amazon 6 |
| Sun Fire 12K |
Starkitty |
| Sun Fire 15K |
Starcat |
| Sun Fire E20K |
Amazon 20 |
| Sun Fire E25K |
Amazon 25 |
Notes
- Four DIMMs of the same size form a bank.
- A populated DIMM bank requires an UltraSPARC IV CPU.
- Mixing UltraSPARC III Cu and UltraSPARC IV is supported.
- The minimum operating system is Solaris 8 2/04 or Solaris 9 4/04.
- F540-5940 is made with covers 340-4293 and 340-7852 and heatsink 541-0078.
- F540-6251 is made with cover 541-0141 and heatsink 541-0122.
- F540-6251 replaced F540-5940 in June 2004.
(WO_29286)
Sun Fire 4800/6800/E4900/E6900 Notes
- The minimum System Controller firmware level for 1050MHz or 1200MHz
is 5.16.
- The minimum System Controller firmware level for 1350MHz
is 5.18.1.
- The Sun Fire 4800 requires E4900 Power Supply 300-1596.
- The Sun Fire 4800 requires E4900 Fan Trays 540-5997, 540-5998, and 540-5999.
- The Sun Fire 6800 requires E6900 Power Supply 300-1595.
- CPU/Memory Board slots are labeled SB0 through SB5.
- Install Filler Board 540-4040 in all empty CPU/Memory Board slots.
- Install Filler Panel 330-2821 when servicing a CPU/Memory Board slot.
Sun Fire 12K/15K/E20K/E25K Notes
- CPU/Memory slots are labeled SB0 through SB17.
- SMS 1.4.1 with patches is required.
For 1350MHz, SMS 1.4.1 with patch
117866-04
is required.
- 540-5940:
- This Uniboard runs at 1050MHz when installed in the
12K, 15K, E20K and E25K.
- All other 1200MHz Uniboards:
- Sun Fire 12K/15K: Full 1200MHz performance requires
hardware upgrade kit C-F1XK-USIV-KIT (carrier plate upgrade),
containing carrier plates 541-0119, 541-0120, and 541-0121.
- The upgrade must be completed by following the System Controller
seeprom update instructions
in SunSolve Document ID
75561.
- Sun Fire E20K/E25K: The required carrier plates are
shipped with E20K/E25K.
- Expander Boards 501-5179-20 and 501-6827-01 include AXQ 6.3.
Upgrade C-HIGHEND-UG includes nine 501-6827 Expander Boards.
References
Sun Fire E4900/E6900 Service Manual, 817-4120.
Sun Fire 12K/15K Service Manual, 806-3512.
Sun Fire High-End and Midrange Systems Memory Module (DIMM) Installation Guide, 806-3281.
Sun Fire System Controller Command Reference Manual Firmware 5.16, 817-2972.
Sun Fire System Controller Command Reference Manual Firmware 5.17, 817-5244.
|