SCSI - PCI Dual Ultra-3 SCSI Host Adapter
PCI Dual Ultra-3 SCSI Host Adapter
| Workstations: |
Ultra 60, 80
Sun Blade 1000, 1500, 2000, 2500 |
| Servers: |
Enterprise 250, 450, 220R, 420R
Sun Fire 280R, 12K, 15K, E20K, E25K
Sun Fire V480, V490, V880(z), V890
Sun Fire 4800, 4810, 6800, E2900, E4900, E6900
Sun Fire V1280, V120, V210, V240, V250, V440 |
| Telco: |
Netra 20, 120, 240, 440, 1280
Netra t1400/1405 |
| Disk Arrays: |
StorEdge 3120, 3310, D2, S1, D240 |
| Tape Libraries: |
StorEdge L8, L25/L100, L180, L700 |
Option 6758
| 375-3057 |
QLogic QLA10162/66-SUN
3.3/5V 32/64Bit 33/66MHz |
Qualified SCSI Cables for Array Connections
| StorEdge 3310 and D2 |
| Type |
Length |
Mktg Part # |
Mfg Part # |
| VHDCI-VHDCI |
0.8 m |
X1136A |
530-2982 |
| VHDCI-VHDCI |
1.2 m |
X1137A |
530-2983 |
| VHDCI-VHDCI |
2 m |
X1138A |
530-2538 |
| VHDCI-VHDCI |
4 m |
X3830B |
530-2984 |
| VHDCI-VHDCI |
10 m |
X3831B |
530-2985 |
| StorEdge S1 |
| Type |
Length |
Mktg Part # |
Mfg Part # |
| HD68-VHDCI |
0.8 m |
X1132A |
530-2452 |
| HD68-VHDCI |
2 m |
X3832A |
530-2453 |
| HD68-VHDCI |
4 m |
X3830A |
530-2454 |
| HD68-VHDCI |
10 m |
X3831A |
530-2455 |
Notes
- The minimum operating system is Solaris 8 with the
Recommended Patch Cluster.
- The necessary drivers (SUNWqus & SUNWqusu for 32-bit
and 64-bit configurations, and SUNWqusx & SUNWqusux
for 64-bit configurations) and patches for this product
are not included in Solaris 8 or 9, but must be downloaded.
Please see the Release Notes,
 816-2157,
for downloading details.
- When using 375-3057 in a multi-initiator configuration with shared
StorEdge 3310 or S1 arrays, the jumpers on the board for the
appropriate shared SCSI bus must be set to "manual SCSI termination".
- The jumpers for Port 2 are set to manual termination by factory
default:
 (J4 and J5 = 2-3)
- Prior to May 2003, the factory default of Port 1 was automatic SCSI
termination:
(J8 and J9 = 1-2)
If Port 1 is shared, these jumpers must be changed to manual
termination:
(J8 and J9 = 2-3)
This became the default setting of J8 and J9 in May 2003.
(see ECO WO_26435)
For details, see BugID 4836405.
- Qualification on Sun Blade 1000 and 2000 is documented in BugID 4644090.
Reference
-
StorEdge PCI Dual Ultra3 SCSI Host Adapter Installation Guide, 816-2156.
-
StorEdge PCI Dual Ultra3 SCSI Host Adapter Release Notes, 816-2157.
|
