---

Dual GigabitEthernet / Dual SCSI Ultra-2 PCI Adapter

Codename: Cauldron-S (also Cauldron Saturn, Cauldron Plus)

Workstations:	Ultra 30, 60, 80 Sun Blade 100, 150, 1000, 1500, 2000, 2500
Servers:	Enterprise 250, 450, 220R, 420R Sun Fire 280R, V120, V210, V240, V250, V440, V20z, V40z Sun Fire V480, V490, V880, V890 Sun Fire V1280, 12K, 15K, E20K, E25K Sun Fire 4800, 4810, 6800, E2900, E4900, E6900
Telco:	Netra T1 AC200/DC200 Netra 20, 120, 240, 440, 1280 Netra t1120/1125, t1400/1405
Disk Arrays:	StorEdge 3120, 3310, S1, D240

Option 4422

501-6635
3.3/5V 32/64Bit 33/66MHz

Notes

1. The minimum operating system is Solaris 8 2/02.
2. Each SCSI interface supports Single-Ended (SE) or Low Voltage Differential (LVD) SCSI connections.
3. To configure 501-6635 into an hsPCI I/O assembly (option X4575A) on Sun Fire 12K or 15K, the following patches are required:
   On Solaris 8: >= 116962-01
   On Solaris 9: >= 117171-07
4. Use 1.5' Ethernet Cable 530-3335 without locking tab and RJ45 Female to Female Adapter 130-5586 to workaround BugID 5011918 against 501-6635-04.
   (Cable Kit 530-3336 includes 130-5586 and 530-3335.)
   530-3335 and 130-5586 briefly shipped with X4422A until 501-6635-05 was released.
5. 501-6635-05 fixes BugID 5011918 (WO_29531, July 2004) by positioning connector orientation tab down:
   

References

1. Dual Gigabit Ethernet and Dual SCSI/P Adapter Installation and User's Guide, 817-4339.
2. Dual Gigabit Ethernet and Dual SCSI/P Product Notes, 817-4340.