AC Power - AC Power Sequencer Power Requirements
AC Sequencer Power Requirements
| 300-1027 |
300-1263 |
300-1264 |
| 300-1126 |
300-1155 |
300-1156 |
Operating Range
Nominal Voltage: 208, 220, 230, or 240 Volts AC
Operating Voltage: Single Phase 180-264 Volts AC
Frequency: 48-63 Hz
Current: 24 A maximum
AC Power Plug
The 230VAC power plug is a NEMA L6-30P. The 240VAC power plug is a Blue,
32A, IEC 309, with Ground at the 6-hour position.
230V Sequencer AC Power Cord
A 12 AWG Type SJO flexible cord rated at 25A when connected to utilization
equipment with 2 current carrying conductors is used. Refer to Article 400-5
of the US National Electrical Code.
NEMA L6-30R / ANSI C73.75 230 Volt Power Receptacle
IEC 309 240 Volt Power Receptacle
| 
