Sun Blade 100
A36
| 375-0096 |
375-3061 |
375-3092 |
0MB FRU
w/o UltraSPARC IIe
FAB R0G + FCC A chassis tray |
0MB FRU
w/o UltraSPARC IIe
FAB R01 + FCC B chassis tray |
0MB FRU
w/o UltraSPARC IIe
FAB R01 + FCC A chassis tray |
Jumper Settings
| JUMPER |
PINS |
SETTING |
DESCRIPTION |
| JP1 |
1-2
2-3 |
In
In |
Select Flash PROM (default)
Select ROMBO |
| JP2 |
1-2
2-3 |
In
In |
OBP write protected (default)
OBP write enabled |
| JP4 |
1-2
3-4 |
In
Out |
UltraSPARC IIe CPU (default)
UltraSPARC IIe CPU (default) |
| JP5 |
1-8 |
Out |
UltraSPARC IIe CPU |
| JP6 |
1-2
1-2 |
Out
In |
Disable Registered DIMM (default)
Enable Registered DIMM |
| JP8 |
1-4 |
Out |
Debug header |
| JP9 |
1-4 |
Out |
OBP Configuration |
| J49 |
1-8 |
Out |
UltraSPARC Debug header |
|
JP3 Speed Select Jumper Settings
| 1-2 |
3-4 |
5-6 |
DESCRIPTION |
UltraSPARC IIe |
| Out |
Out |
Out |
500MHz UltraSPARC IIe |
100-6471 or 100-7270 |
| In |
Out |
Out |
550MHz UltraSPARC IIe |
Not available |
| Out |
In |
Out |
600MHz UltraSPARC IIe |
Not available |
| In |
In |
Out |
650MHz UltraSPARC IIe |
Not available |
| Out |
Out |
In |
Reserved |
Not available |
| In |
Out |
In |
Reserved |
Not available |
| Out |
In |
In |
Reserved |
Not available |
| In |
In |
In |
450MHz UltraSPARC IIe |
Not available |
Notes
- 375-3092
(ECO WO_22711, December 2001)
resolves the problem of installing 375-3061 in a system that
shipped originally with 375-0096. 375-3092 consists of the
board FAB of 375-3061 and the Class A chassis from 375-0096.
Please see next Note.
- 375-3061 is not compatible with the FCC Class A chassis.
It cannot be installed in a system that originally shipped with
375-0096. Order 375-3092 instead.
- The FCC Class B chassis is marked with the letter A on the EZ Label.
- 375-0096 is not forward compatible and cannot be used in systems
shipped with 375-3061.
- Boards labeled "375-0096-06" are functionally equivalent to 375-3061-01.
- The minimum operating system is Solaris 8 10/00.
- The minimum memory requirement is one DIMM in U2.
- The memory installation sequence is U2, U3, U4, and U5.
- Each DIMM slot addresses 512MB with 500MHz UltraSPARC IIe.
- Each DIMM slot addresses 1GB with >=550MHz UltraSPARC IIe.
References
Sun Blade 100 Getting Started, 806-3415.
-
Sun Blade 100 Service Manual, 806-3416.
Sun Proprietary/Confidential
|
