Chassis Backpanel

RSM Array 2000 / StorEdge A3000
StorEdge A3500 / StorEdge A3500FC

370-2431

Notes

1. Set Controller 1 to Host-Side SCSI ID 4.
2. Install Controller 1 in the lower slot of the chassis.
3. Set Controller 2 to Host-Side SCSI ID 5.
4. Install Controller 2 in the upper slot of the chassis.

RSM Array 2000 Notes

1. The Phase I minimum operating system is Solaris 2.4.
2. The Phase IIminimum operating system is Solaris 2.5.1.

SSA 214/219 RSM Drive Tray Notes

1. Count Drive Trays from the bottom (Tray 1) to the top (Tray 5) of the Expansion Cabinet.
2. Set the Drive Tray to hi-order addressing (8 - f) by installing a jumper at location ID3 on the WD2S card.

References

1. RSM Array 2000 System Manual, 802-7603.
2. RSM Array 2000 Controller Module Installation Guide, 802-7602.