Notes

1. Jumpers J0803, J0804, and J01003 are on the solder side.
2. Loop-B Board 501-4877, Backplane 501-4878, and cable 530-2681 were replaced by Backplane 501-5993 with integrated FC-AL Loop-B.
3. Do Not connect Power Distribution Board cable 530-2745 to J0801.
4. NOTE: When updating the disk backplane firmware using patch 111474, the superuser prompt will return after issuing the luxadm command in step 2 of the patch instructions. You must wait at least 15 minutes after the superuser prompt returns before continuing or performing any other operations. This minimum wait time is required for the flash update process to propagate the firmware code to all SSC100 processors in the system.

Reference

Sun Fire V880 Server Service Manual, 806-6597.

Notes

1. Jumpers J0803, J0804, and J01003 are on the solder side.
2. Do Not connect Power Distribution Board cable 530-2745 to J0801.
3. NOTE: When updating the disk backplane firmware using patch 111474, the superuser prompt will return after issuing the luxadm command in step 2 of the patch instructions. You must wait at least 15 minutes after the superuser prompt returns before continuing or performing any other operations. This minimum wait time is required for the flash update process to propagate the firmware code to all SSC100 processors in the system.

Reference

Sun Fire V880 Server Service Manual, 806-6597.